Passing the Torch

This post is a week late and for that I apologize. It will also be my last for now. Galen and I have both reached a point where is it best for us to step away from the museum. We leave the shop in John's capable hands and I leave this blog with in the hands of my wonderful crew. I'm sure they'll keep you up to date on goings on in the shop.

With 1326 in the shop for motor repairs, Lou has begun refurbishing the controllers, another needed job.

Lou works on disassembling an arc shoot set from 1326

Scott is helping John out with 3001 by completing final cleaning on the journal boxes.

Scott pauses in his work to say hi

Tad is making great progress on 169. He's gotten much of the front of the clerestory prepped and has started priming work on the sides where accessible.

Clerestory paint work in progress on 169

While it's hard to say goodbye, I know the cars are in very good hands. I can still be reached via the contact gizmo on the sidebar if you need to get a hold of me for whatever reason. All the best. Kelly

Hello, 1326!

1 was released from the shop after Galen completed repairs to the east end tow point. This will allow us to safely tow the car with the diesel if needed. The car returns to Kelly Barn where it remains out of service until further improvements can be made.

We had a week of air system issues with both 16 and 65 being placed out of service. Jeremy came in and assessed 16, tracing its problems to a hole in one of the pipes. Unfortunately, the pipe was inaccessible in Kelly Barn so repairs had to wait a few days until the car could move up to the shop. Galen and Kelly replaced the rotted pipe and returned the car to limited service. 65 has been diagnosed with a rotted out gasket in the main brake cylinder. We've begun soaking bolts in PB Blaster and hope to complete repairs in the next few weeks.

16's old air pipe clearly shows the source of the leak

New air pipe in 16

Mike has added logos to S193 and completed painting the hand rails. Compared to where this car was last year, it has made a complete transformation, all for the better.

1326 was moved back into the shop so we can being repairs to the motors next week. We expect repairs to take about eight weeks if all goes well. 15 was moved in front of the shop to give the Operations Team better access to power so they can continue exterior cosmetic work. 5645 has been moved to storage while it waits its turn for repair.

1326 waits for repairs

Sprucing Up

355 received its maintenance last weekend. The car has been placed in reserve status due to increasing damages on the underside from the heaving of the barn floor. We've decided to take advantage of having the car out of service and Scott W has started varnishing the seats. Boy does the car look better already! And he's just getting started.

Varnish work in progress on 355

Tad completed primer work on 169's east end, giving the car its first big visual progress jump in far too long. He's planning on tackling the work around the clerestory next and we're delighted to see the project moving ahead once again.

169's east end is looking sharper

Elsewhere, Adam continued paint work on 18's roof. John is finishing up work on the journal boxes for 3001's east end truck. Galen cleaned out the pit, a needed job so we can roll our nice new pump cart around while working on 1326. Kelly finished up the wiring work under 1.

We were happy to have Scott Kritzky stop by to visit with his son William who's gotten a lot bigger since the last time we saw him. Hopefully we'll be seeing them again soon.

Oh and take a look at the final product of 836's seat refurbishment! We caught the car out in the sun to really show off the great work Scott and Galen did. And, by the way, they did all this in the dark back of the barn working with only drop lights to see by.

Change of Fleet

We're saddened to report that 5645 has been removed from service. The car developed a hot box with bearing melting last week. Inspection revealed that the journal boxes are skewed in the frame indicating box and/or slider plate failing. The car will require extensive truck work, similar to what John has been doing for 3001. At this point, with both of our small shop trucks under 3001, we've decided to place 5645 in storage and prioritize repairing 1326 which will be a shorter repair time-wise. We're ordering a cart to aid in safely dropping 1326's armatures into the pit and hope to start work by fall.

On a happier note, we welcomed Steve Giarrusso to the shop yesterday. He replaced the failed compressor switch on 355. He then joined Kelly in performing routing maintenance on 16. Galen completed temporary truck repairs for the car and it has been released for limited service. We hope to see 16 running one trip a week for the public. It has also be designated as the official training car for new motormen.

Scott completed varnish work in 836 and it will be running regular service, replacing 5645 as the main closed car. We've also released 65 to limited service, allowing it to complete one trip a week. Both 16 and 65 have old rattan seating which cannot stand up to the rigors of coronavirus cleaning, so the cars must quarantine after meeting with the public as their method of disinfecting. The Operations Department will schedule the cars to ensure adequate time for the virus to die off between passenger trips.

Tad has completed removal of the paint from the undersides of clerestory sides on 169. He also completed primer work on the east end wall.

169's clerestory sides are now paint free

Primer work is complete on east wall of 169

Lou completed a window repair on 836 and made a new gasket for 18's brake stand.

Lou works on cutting a new gasket for 18

Some Fun with 1 and Digging into 18's Issues

Today 1 got some sprucing up. Galen trimmed the extra lengths off the roof boards and the evened out the roofing. Wil and Kelly washed the windows, much improving visibility. The car made two trips on the line before rain threatened and it had to be put away as it is no where near ready to face inclement weather. Wil and Kelly ran the car to celebrate their birthdays and Galen, Mike, and Ryan also took a turn at the controls.

1 with cleaned up roofing

Wil at the controls after completing an eastbound trip

Kelly prepares for the westbound trip (Galen Semprebon photo)

Scott did some cleaning up inside 18 then moved back onto 836, preparing the seats for their next coat of varnish. Lou swapped the two brake stands in the locomotive which allowed us to determine the source of the leak in the air system was one of the brake stands and not the piping itself. He disassembled and began cleaning the stand. Galen finished the work. We found a seized component but issues persist. A new gasket will be made and will hopefully help the problem. The journal boxes were also inspected. Kelly removed mouse nests from five of them and Wil did the much needed oiling.

18's brake stand apart for cleaning

John is making progress with weld repairs to 3001's journal boxes.

Journal box work in progress

1 Makes its First Test Trips

Line car 1 went out on the line for the first time yesterday evening. It performed beautifully. So beautifully in fact, we couldn't resist a second trip. We made periodic stops for photos and videos to document the trip and I'll share the best of mine below and add any of Galen's once I get them from him.
At 128 years young, 1 represents a doubling of our running work car fleet and we're looking forward to it joining S193 in service once we tie up loose end. This was its first ever trip down our main line as it has sat in storage since it came to us from Trolleyville in 2009. We're not sure when it last ran at its former home, but 2005 would have been the latest as that's when they closed their doors. For having spent 15 years in dead storage, its in amazing shape. We'll look to make a few minor tweaks in the interim, but at this time we're delighted to say it can take our volunteers out for a few trips this coming Saturday.

Outbound at Hancock Siding

At Newberry Siding, before turning around to head in (railway is closed past this point due to heat sagging in the overhead wire, SC&ET worked hard in yesterday's heat but wasn't able to defeat all of the issues, we wish some better weather for them on their next work day)

Departing Newberry Siding inbound

Inbound next to the semaphores

Passing Woods Barn inbound

Inbound by Woods Barn

Crossing Borrup Road

On North Road Curve

With the newly repaired Isle of Safety

In the yard with 4 and S193

Off to bed

Line Car 1 is on the Move!

Yesterday brought opening day to the museum under hot, humid conditions. It also brought a new sight to staff and visitors. Line car 1 received its poles and ventured out around the yard for some basic testing. It made two trips up and down the yard before lunch. After lunch, it ventured up to the shop to drop off all of the tools we'd been using to work on it. This had the added benefit of letting us test the car through some more switches and around a curve. So far everything looks good. The weather did us in and we called it a day early, but we hope to take the car out on the line one evening this coming week for its first test trip. A myriad of little things remain needed to complete the car, but it is a delight to see it mobile for the first time in the eleven years it has been on the property.

Hooks and catchers installed on 1 last Monday night

1 sneaks out of the barn on a bug. Mike Luzzi video

Roof side view of pole installation on 1

First move with poles. Gina Alimberti video

1 sits on North Road curve with 4 after its first trip down the yard

Wil runs brakes on the first trip up the yard. Only the east end controller is functional at the moment. Mike Luzzi photo

Galen takes a turn at the controls and makes the second run down the yard

1 up at the shop to offload tools

Mike continues work on S193, More black paint has been added and the car again sports its lettering and numbers.

S193 shows off its new markings

Scott and Lou worked on 836. Scott continued work on varnishing the seats. Lou finished the refurbishment of the west end controller and replaced a section of broken upper window frame on the north side of the car.

Freshly varnished seat in 836

Lou works on reassembling the arc shoot for 836's west end controller

Adam did some painting on 18's roof. Tad worked on removing paint from the underside of 169's roof around the clerestory.

Progress on 18's roof. Adam Krause photo