Moving the Fleet

After a week in the shop for some quick touch ups, Connecticut Company 65 has been returned to the Operations Department for service!

65 departing North Road for a test run

In preparation to move 5645 into the shop for repairs, John and the shop needed to manufacture a new oil block for diesel 1. The old block required special hoses to be ordered if one ever failed. John manufactured the new block to be compatible with any standardized oil hose.

The new oil block (on the right with the hose attached)

169 was also moved up into Northern Barn while the fleet was being shuffled around. This was the first time 169 has seen daylight in over 40 years.

169 waiting to be moved into Northern Barn

5645 was moved into the shop after 169 was moved to complete bearing repairs as well as an annual inspection.

A new air tank has been restored to be put under car 16 within the next year. 

16's new air tank

We'd all like to send out a special thank you to Dennis. Dennis has been extremely helpful during our transition in the shop and has been with us to lend a helping hand. Thanks!

Passing the Torch

This post is a week late and for that I apologize. It will also be my last for now. Galen and I have both reached a point where is it best for us to step away from the museum. We leave the shop in John's capable hands and I leave this blog with in the hands of my wonderful crew. I'm sure they'll keep you up to date on goings on in the shop.

With 1326 in the shop for motor repairs, Lou has begun refurbishing the controllers, another needed job.

Lou works on disassembling an arc shoot set from 1326

Scott is helping John out with 3001 by completing final cleaning on the journal boxes.

Scott pauses in his work to say hi

Tad is making great progress on 169. He's gotten much of the front of the clerestory prepped and has started priming work on the sides where accessible.

Clerestory paint work in progress on 169

While it's hard to say goodbye, I know the cars are in very good hands. I can still be reached via the contact gizmo on the sidebar if you need to get a hold of me for whatever reason. All the best. Kelly

Sprucing Up

355 received its maintenance last weekend. The car has been placed in reserve status due to increasing damages on the underside from the heaving of the barn floor. We've decided to take advantage of having the car out of service and Scott W has started varnishing the seats. Boy does the car look better already! And he's just getting started.

Varnish work in progress on 355

Tad completed primer work on 169's east end, giving the car its first big visual progress jump in far too long. He's planning on tackling the work around the clerestory next and we're delighted to see the project moving ahead once again.

169's east end is looking sharper

Elsewhere, Adam continued paint work on 18's roof. John is finishing up work on the journal boxes for 3001's east end truck. Galen cleaned out the pit, a needed job so we can roll our nice new pump cart around while working on 1326. Kelly finished up the wiring work under 1.

We were happy to have Scott Kritzky stop by to visit with his son William who's gotten a lot bigger since the last time we saw him. Hopefully we'll be seeing them again soon.

Oh and take a look at the final product of 836's seat refurbishment! We caught the car out in the sun to really show off the great work Scott and Galen did. And, by the way, they did all this in the dark back of the barn working with only drop lights to see by.

Change of Fleet

We're saddened to report that 5645 has been removed from service. The car developed a hot box with bearing melting last week. Inspection revealed that the journal boxes are skewed in the frame indicating box and/or slider plate failing. The car will require extensive truck work, similar to what John has been doing for 3001. At this point, with both of our small shop trucks under 3001, we've decided to place 5645 in storage and prioritize repairing 1326 which will be a shorter repair time-wise. We're ordering a cart to aid in safely dropping 1326's armatures into the pit and hope to start work by fall.

On a happier note, we welcomed Steve Giarrusso to the shop yesterday. He replaced the failed compressor switch on 355. He then joined Kelly in performing routing maintenance on 16. Galen completed temporary truck repairs for the car and it has been released for limited service. We hope to see 16 running one trip a week for the public. It has also be designated as the official training car for new motormen.

Scott completed varnish work in 836 and it will be running regular service, replacing 5645 as the main closed car. We've also released 65 to limited service, allowing it to complete one trip a week. Both 16 and 65 have old rattan seating which cannot stand up to the rigors of coronavirus cleaning, so the cars must quarantine after meeting with the public as their method of disinfecting. The Operations Department will schedule the cars to ensure adequate time for the virus to die off between passenger trips.

Tad has completed removal of the paint from the undersides of clerestory sides on 169. He also completed primer work on the east end wall.

169's clerestory sides are now paint free

Primer work is complete on east wall of 169

Lou completed a window repair on 836 and made a new gasket for 18's brake stand.

Lou works on cutting a new gasket for 18

Line Car 1 is on the Move!

Yesterday brought opening day to the museum under hot, humid conditions. It also brought a new sight to staff and visitors. Line car 1 received its poles and ventured out around the yard for some basic testing. It made two trips up and down the yard before lunch. After lunch, it ventured up to the shop to drop off all of the tools we'd been using to work on it. This had the added benefit of letting us test the car through some more switches and around a curve. So far everything looks good. The weather did us in and we called it a day early, but we hope to take the car out on the line one evening this coming week for its first test trip. A myriad of little things remain needed to complete the car, but it is a delight to see it mobile for the first time in the eleven years it has been on the property.

Hooks and catchers installed on 1 last Monday night

1 sneaks out of the barn on a bug. Mike Luzzi video

Roof side view of pole installation on 1

First move with poles. Gina Alimberti video

1 sits on North Road curve with 4 after its first trip down the yard

Wil runs brakes on the first trip up the yard. Only the east end controller is functional at the moment. Mike Luzzi photo

Galen takes a turn at the controls and makes the second run down the yard

1 up at the shop to offload tools

Mike continues work on S193, More black paint has been added and the car again sports its lettering and numbers.

S193 shows off its new markings

Scott and Lou worked on 836. Scott continued work on varnishing the seats. Lou finished the refurbishment of the west end controller and replaced a section of broken upper window frame on the north side of the car.

Freshly varnished seat in 836

Lou works on reassembling the arc shoot for 836's west end controller

Adam did some painting on 18's roof. Tad worked on removing paint from the underside of 169's roof around the clerestory.

Progress on 18's roof. Adam Krause photo

Record Project Day

Today we set a new record for number of vehicles worked on: 7! Crew members worked separately or with those they arrived at the museum with to comply with social distancing requirements.

We're delighted to welcome new volunteer Tad Adams to the shop. He worked on removing paint from the underside of 169's east end roof (this is the one project I never made it back to get photos of. Sorry, Tad!).

Progress is zipping along on car 1. Galen and Kelly have installed roof cleats and three roof boards are attached. Lou rebuilt the second arc shoot set for the car. He also applied fresh insulating varnish to the interiors of both controllers.

Roof cleats on 1

1's new roof boards

Lou works on applying insulating varnish in 1's controller

Mike added another coat of red and yellow paint to S193, which is looking much better for all the attention.

Mike at work on S193

S193's new paint (Mike Luzzi photos)

During the week, Larry added a coat of polyurethane to 4's seats and today Wil and Jayden added another coat. The seats are looking better. 

4's seats after the second coat of poly

Once they were finished with 4, Wil and Jayden moved on to 5645 and painted half of the seats. This is a major and long overdue improvement for the car.

Wil and Jayden at work

5645's newly painted seats

Adam worked on locomotive 18, prepping the roof for paint.

Adam at work on 18's roof

Close up views of the prep work on 18 (Adam Krause photos)

John has sandblasted, primed, and mostly painted 3001's truck.

John at work painting

Truck progress so far (John ran out of paint and needs to get more!)

Jeremy was in during the week. He disassembled and cleaned 16's air governor so it no longer leaks. He and Kelly also finished repairs to the wiring harness and performed a minor repair to the brake rigging.

The air governor received fresh paint on the cover as part of its refurbishment (Jeremy Stager photo)

The armature and field coils for the spare air compressor received a coat of insulating varnish.

Fresh varnish on the compressor armature

Priming and Welding

The majority of 169's east end platform is now wearing a fresh coat of primer. Bruce has removed the pocket door and is in the process of cleaning it up. The door was sticking, so the sliding mechanism will be examined before the door is reinstalled.

169's east end platform sports new primer

169's east end door is cleaning up nicely

Larry primed 18's doors yesterday and Galen began repainting the roof. Meanwhile, John gave Kelly her first welding lesson and the side of the locomotive now bears its first steel patch where the side had rotted out.

18's east end door primed

18's south side prepped for weld

 18's first patch panel is in place

Pat has removed the troublesome starter from the auger truck. A rebuilt or new starter should be installed next weekend to get the truck back up and running for the SC&ET department. The truck is used to create holes for setting new telephone poles along the line to support the overhead wire.

Sprucing up 18

With a beautiful spring day, lots of work was accomplished.

Kelly, Brian, and Wil greased the motor gears for the majority of operating fleet.

The crew also made great progress on 18. Larry and Fred painted the west end cow catcher and window frames black. Galen prepared the locomotive for the installation of the new brake pipes and worked to patch the hole in the roof. Rex and Jordan vacuumed out the interior of the locomotive, clearing years of debris from the floor and ensuring there were no fire hazards inside the electrical boxes and controllers.

Freshly painted window frames on 18

18's west end is looking better

John has removed one of the steps from the side of 3001 where the treadle door will be eliminated. Kelly got back to work on cleaning up the east end controller. Fred also got in a bit of work removing paint from 169's east end platform ceiling.

2018 Operating Season is Underway

While operations began last weekend, worked continued on maintaining operating fleet. Kelly, Wil, and Rex cared for car 355. Galen helped as well, replacing a defective brush holder in the compressor. Locomotive 18 was placed back in front of the shop where we hope to have time to work on it again soon.

Yesterday, we were happy to see Julia Saari-Franks and Christopher Franks, current participants in the Trolley Care Program. They helped Kelly maintain cars 4 and 16, finishing the spring maintenance for the operating fleet. They then moved on to scraping paint on 169 while Kelly continued cleaning up 3001's east end controller. With spring weather arriving, we're all glad to be back out in the shop.

John has begun planning the year's work for 3001. Fred and Bruce continue to clean up seat bases for the car. John and Kelly also discussed potential other projects for the year, including some much needed floor painting for operating fleet.

Kicking Off 2018

After a cold, snowy, and icy end to 2017 and beginning of 2018, the shop is happy to be back to work. Fred continues work on cleaning up detailed components for 3001. Galen has cleaned the old varnish and paint form 169's clerestory windows. John is working to repair a leaking brake stand in car 16. Bruce, Rex, and Kelly have begun the shop's traditional winter work on the restoration of car 1500. This year, work continues in the kitchen and dinning room. Work has also begun in the bedroom.

Bedroom in 1500

Bedroom of 1500, looking into the bathroom and kitchen

Bedroom in 1500

Varnish removal has begun in the bedroom of 1500