Sunday, May 6, 2018

Patching Up and a Special Trip

Work continued on 18 yesterday. Galen began reassembling the east end brake stand. Dave Coppola (Track Department Superintendent) and Brian worked on cleaning up and painting the west end. Kelly and Wil prepped three areas on the side for patch panels and cut the steel. One panel was partially installed. John had installed a second patch panel during the week and primed the two installed panels.

Brian and Dave at work painting 18. Photo by Mike Luzzi

Fresh paint on 18

18's west end catcher is now fully painted

Patching work in progress on 18's south side

Kelly works on welding in the newest patch panel. Photo by Mike Luzzi


John has been at work on 3001, installing reinforcing plates on the frame.

Support panels installed in 3001


303 came out to make a special trip for the Annual Meeting.

303 and Diesel 1 wait on the Northern Barn track


Lastly, we are saddened to report that 2600 has been removed from active service. The car has sustained damage to one of its wheel flanges and the metal is too brittle to repair to a safe operating state. The car will need new wheels pressed on all around to render it ready for active service again.

2 comments:

  1. What is the associated cost with a repair such as that?

    ReplyDelete
    Replies
    1. Unfortunately expensive as we will likely need to have new wheels specially cast for the car. 2600 need other work as well as its restoration is showing age. To fix the car to ideal state (full restoration), expect something along the lines of 100-150k, which is the typical cost of a restoration project.

      Delete