3001

Car 3001 began a complete restoration in the fall of 2016. The car has been out of service since the 1980s. Some work had been previously started and the car had sat in a partially disassembled state for many years.

Journal box repair. June 2020

Truck sandblasted and painted. May 2020

Brake shoe holder repair. May 2020

Spring holder work. November 2019

New west end brake stand pipes. August 2019

Lou and Galen work on separating the field coils from motors 1 and 2. June 2019

Motor 1 and 2 disassembly in progress. June 2019

East end truck placed on supports. June 2019

Motor 1 hoisted out. June 2019. Photo by Adam Krause

Adam, Lou, and Galen work on removing motor 1. June 2019

Katy, Lou, and Galen work on removing the gear case from motor 1. June 2019

West end jacked and truck removed. East end has shop truck installed. June 2019

East end truck removed. June 2019. Photo by Katy Krause

Jacking east end to remove truck. June 2019. Photo by Katy Krause

Jacking east end to remove truck. June 2019

John welds in a patch panel. May 2019

West end frame progress. December 2018

West end steel work in progress. October 2018

West end frame fully assembled and painted. August 2018

West end frame assembly progress. August 2018

West end framing being assembled. August 2018

John works on straightening the west end frame. July 2018

West end disassembled. July 2018

West end after condition. June 2018

West end before condition. June 2018

John works at disassembling the west end. June 2018/td>

East end controller parts insulated. June 2018

East end controller shaft partially reinsulated. June 2018

East end controller case reinsulated. June 2018

Steel work. May 2018

Steel work. May 2018

Steel work. May 2018

Steel work. May 2018

Car interior. October 2017

New steel welded into window support posts. September 2017

Rotted out window support post. September 2017

East end controller disassembly in progress. August 2017

East end controller condition. August 2017

Rotten section of car side cut out. August 2017

Car has been stripped to the frame. July 2017

Found under the floor. June 2017

Roof and floor removed. June 2017

Rood removal has begun. April 2017

John atop car during trolley base removal. April 2017

Car cleared of debris. January 2017

Removing old roofing. December 2016

Car cleaned of dust. November 2016

Interior of car. November 2016

In the shop. November 2016

No comments:

Post a Comment